Vacuum Tray Dryer

Product Details:

Established in the year 2005, We, Imochem Engineers, are one of the preeminent Manufacturer, Supplier, Exporter and Trader of Tray Dryer, Mixing Tank

Additional Information:

• Production Capacity: 100 Pieces
• Delivery Time: 20-25 Days(Depending as per Required Capacity .

Product Details:

The Vacuum Tray Dryer is basically a tray dryer working under vacuum conditions. It dries on the conduction principle. There are a number of shelves inside the dryer on which the trays containing products are placed. The top most shelf is a dummy shelf to ensure proper heating and to block dried powder from escaping into the solvent extraction system.

The shelves are manufactured in hollow construction with baffles cum stiffeners placed in between. Each shelf has an inlet and outlet nozzle. Each shelf is connected through these nozzles to an Inlet and Outlet Header. Hot media is passed through the Inlet Header and in turn to each shelf. The hot media flows through the shelves in a uniform zig-zag manner ensuring faster heat transfer to the surface, which in turn heats up the Trays placed on the shelves. The hot media flows out from the shelves through the Outlet Header.

The Inlet and Outlet Headers are designed such that the flow of the heating media is equally distributed into the each of the shelves.

The Dryer chamber is constructed from heavy thickness plates to ensure that there is no buckling during the vacuum operation. Additional limpet coils are provided to further stiffen the body and also to pass the hot media. The chamber is provided with a heavy door with a adequate locking arrangement.

The Dryer Chamber is connected through a vapour column to a Shell Et Tube type Heat Exchanger, which in turn is connected to a Condensate Receiver. Vacuum is applied to the condensate receiver. Vapour evolved during the drying process is collected in the receiver after it is cooled in the Heat Exchanger.

The vapour to be cooled is passed thru the tube side of the Heat Exchanger. While cooling water is passed thru the shell side. A cooling coil is present in the condensate receiver, to further coot any vapours entering the receiver before it is goes into the vacuum pump.

The Condensate receiver is connected to a Vacuum Trap, to ensure that any uncooled vapours arising from the receiver is trapped and allowing very minimal contents of the vapour to pass into the Vacuum Pump.

Specifications:

Additional Information:

• Packaging Details: Automation grade - IPSS/PLC

Product Details:

Established in the year 2005, We, Imochem Engineers, are one of the preeminent Manufacturer, Supplier, Exporter and Trader of Tray Dryer, Mixing Tank

Product Details:

Established in the year 2005, We, Imochem Engineers, are one of the preeminent Manufacturer, Supplier, Exporter and Trader of Tray Dryer, Mixing Tank

Additional Information:

• Delivery Time: 4 - 6 Week